electric crack grooving machine partner
You are here: Home » News » Blogs » Comparative Interpretation of Self-propelled DG400 vs Trailer-mounted TG350 Crack-Sealing Machine

Comparative Interpretation of Self-propelled DG400 vs Trailer-mounted TG350 Crack-Sealing Machine

Views: 0     Author: Site Editor     Publish Time: 2026-11-27      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Abstract

Pavement cracks are typical early defects for asphalt roads. Crack-sealing machines melt hot-pour sealant and inject material into cleaned cracks to stop water infiltration and extend road service life. DG400 self-propelled and TG350 trailer-mounted are two mainstream models for road maintenance. This paper compares parameters, core structures, site adaptability, real-world cases and selection principles for these two units.

1. Introduction: Value of Crack-Sealing Machines in Pavement Preventive Maintenance

1.1 Pavement hazards induced by cracks

· Under traffic load and temperature variation, asphalt pavements develop transverse and longitudinal cracks. Rainwater seeps through cracks into subgrade, further triggering depressions, potholes and alligator cracking, shortening road service life significantly.

· Crack sealing is a cost-effective preventive-maintenance solution for early-stage pavement defects.

1.2 Functional role of crack-sealing machines

· Crack-sealing machines heat hot-pour sealant inside melter kettles. Material is pumped through electric-heated hoses and applicator wands into pre-grooved and cleaned pavement cracks.

· It blocks water and debris intrusion to subbase, retards pavement deterioration. Widely applied for expressways, provincial highways, municipal roads, county-rural roads and airport pavements.

1.3 Position difference between self-propelled and trailer-mounted types

· Self-propelled DG400: Equipped with independent electric drive system. No external towing vehicle required. Optimized for continuous work zones requiring frequent short-distance relocation.

· Trailer-mounted TG350: Without built-in travelling power. Must be towed by service trucks. Compact layout for long-distance transit and scattered defect sites.

2. Basic Specifications & Shared Core Configurations

2.1 Main technical parameters comparison

Item

DG400 Self-propelled

TG350 Trailer-mounted

Overall dimension

4100×1640×1960 mm

3100×1640×1960 mm

Net weight

1600 kg

1200 kg

Melter kettle capacity

400 L

350 L

Melt-down time

45 min

45 min

Heat-transfer oil volume

80 L

80 L

Electric-heated hose

6 m, 220 V

6 m, 220 V

2.2 Shared core functional assemblies

热再生1


2.2.1 Indirect heat-transfer-oil melter-kettle heating system

· Both adopt indirect heating via heat-transfer oil. Burners fire at 45-degree angle without direct flame contact with kettle shell. Complete combustion improves thermal efficiency.

· Automatic constant-temperature control prevents sealant carbonization caused by overheating.

2.2.2 Temperature control, agitation & pumping-wand assembly

· Equipped with Japanese Omron dual digital thermostat and imported K-type thermocouple. Real-time monitoring for heat-transfer oil, sealant and hose temperature.

· Imported variable-speed electric agitator avoids material sedimentation; easy disassembly and service.

· Domestic material pump: flow rate 2 m³/h, working pressure 0.16 MPa. Electric pump trigger mounted directly on sealing wand for on-spot start-stop, reducing sealant waste.

2.2.3 Flexible hose and auxiliary safety features

· Discharge hose supports 270-degree rotation with high flex resistance, adapting to transverse and longitudinal pavement cracks.

· Splash-proof feeding opening, thermal insulation layers for kettle and hoses to reduce scald risk. Yacht-grade trailer axle lowers filling height and eases manual operation.

· LED warning arrow device improves safety for lane-occupying road-work zones.

· US-imported burner, 62 L diesel fuel tank. Honda gasoline generator provides auxiliary power for both models.

3. Key Differences Between Two Models

3.1 Travelling & transit mode (core distinction)

· DG400 self-propelled: Electric self-driving with automatic gear. Max speed 55 km/h, cruising range approx. 60 km. Short-distance movement on-job-site is independent without towing trucks.

· TG350 trailer-mounted: No on-board drive unit. Must be towed by pickup or maintenance lorry. Manual repositioning for minor on-site displacement.

3.2 Kettle volume, weight and overall dimension

· DG400: 400 L kettle, net weight 1600 kg, longer overall length. Larger material storage reduces refilling frequency.

· TG350: 350 L kettle, net weight 1200 kg, shorter body. Light-weight and compact for storage and transport.

3.3 Generator power configuration

· DG400: Honda generator rated power 2.8 kW. Supplies power for heating, agitation, hose heating plus electric propulsion system.

· TG350: Honda generator rated power 3 kW. Only serves melting, stirring and pumping systems with no driving-load consumption.

3.4 Site mobility & terrain adaptability

· DG400 self-propelled ①Can follow grooving and air-blowing procedures continuously within closed municipal work zones, streamlining workflow; ②Requires larger turning radius, less flexible for extremely narrow rural roads.

DSC_2059

· TG350 trailer-mounted ① Detach tow hitch after arrival for limited manual repositioning at work spot; ②Convenient long-haul transit by towing vehicle, better maneuverability on narrow curved sections; ③ Frequent hitch-connect / disconnect operations reduce workflow continuity for continuous-length sealing.

3.5 Operation-maintenance & supporting-vehicle requirements

· DG400: Extra maintenance for electric drive and battery pack; no dedicated towing vehicle required.

· TG350: Simpler mechanical structure with fewer fault points; maintenance fleet must have tow-capable service vehicles for relocation.


6


4. Application Scenarios & Practical Construction Cases

4.1 Scenario 1: Concentrated municipal-road sealing work (prefer DG400 self-propelled)

Case: Spring preventive maintenance for urban arterial roads - Project background: Multiple urban arterial roads for 2-3 km continuous crack-sealing, half-lane closure during daytime; mainly long longitudinal cracks. - Equipment deployment: DG400 self-propelled crack-sealing machine 1-Groover, air blower and sealing machine operate as continuous workflow. The sealing machine advances autonomously along work zones without repeated trailer coupling. 2-400-L large-capacity kettle enables long-section construction and cuts refilling times. 3-LED warning lights warn passing motor-vehicles and non-motor-vehicles. - Result: Approx. 2200 linear-meters completed per working day, well-suited for dense continuous pavement defects in cities.

4.2 Scenario 2: Dispersed crack repair along provincial mountain highways (prefer TG350 trailer-mounted)

Case: Sectional crack treatment on mountainous provincial highway -Project background: 80-km mountain arterial highway with scattered crack spots (dozens to hundreds of meters per location). One pickup truck serves as support vehicle for maintenance crew. -Equipment deployment: TG350 trailer-mounted crack-sealing machine 1-Pickup tows the machine rapidly between scattered defect sections. Unhitch and start sealing after arriving at each spot. 2-Light-weight body delivers good turning performance for mountain curves and narrow pavements. 3-350-L kettle satisfies intermittent spot-repair requirements. -Result: Crew can cover multiple work locations each day. Ideal for scattered-spot arterial-highway maintenance.

4.3 Scenario 3: Expressway preventive-maintenance conditions for both models

- DG400 self-propelled: Fit for multi-kilometer continuous sealing within fully closed lanes. Note: Must be transported by flat-bed truck into closed work zone; cannot run on open expressway main lanes by self-propulsion. - TG350 trailer-mounted: Towed by dedicated expressway-maintenance trucks. Suitable for intermittent spot repair on expressways, deployed inside closed-traffic zones.

4.4 Scenario 4: County-rural highway scattered-defect treatment

- For concentrated crack sections with acceptable road width: select DG400 self-propelled to improve productivity and reduce refilling frequency. -For highly scattered defects with narrow, winding lanes: select TG350 trailer-mounted, compact size supports manual fine adjustment after towing vehicle arrives.

5. Equipment Selection Guidelines

5.1 Judged by work pattern: continuous vs scattered defects

- Long continuous crack sections → Prefer DG400 self-propelled - Multi-spot scattered defects with long distance between work points → Prefer TG350 trailer-mounted

5.2 Judged by supporting-vehicle resources

- No spare towing vehicle available, require independent on-site mobility → DG400 - Maintenance fleet already owns tow-capable pickups / lorries → TG350 is cost-effective

5.3 Judged by daily workload & sealant consumption

- High daily sealing output, large sealant consumption, minimize refilling cycles → DG400 (400 L kettle) - Routine minor repair with moderate daily sealing length → TG350 (350 L kettle) meets demand

5.4 Judged by site spatial constraints: road width & turning space

- Narrow lanes, sharp curves, limited turning clearance → Compact TG350 performs better - Wide pavement with complete half-lane closure → DG400 self-propelled delivers higher efficiency

6. Shared Daily-operation & Maintenance Notes

6.1 Pre-job inspection checklist

- Check generator fuel and oil level; verify heat-transfer-oil volume. - Confirm normal function of thermostat, thermocouple, agitator and wand trigger switch. - Inspect electric-heated hose for damage; test LED warning device.

6.2 Temperature control to prevent sealant carbonization

- Follow automatic thermostat settings strictly. Even with indirect oil-jacket heating, avoid prolonged over-temperature holding to prevent sealant deterioration.

6.3 Pipeline and hose maintenance after construction

- Clean kettle residues while sealant remains warm after daily shift completion. - Coil heating-hose properly; avoid sharp bending or squeezing to extend service life.

6.4 Safety operation: anti-scald & road-work safety

- Wear protective gloves during feeding; never touch high-temperature kettle or hoses directly. - Activate LED warning system for lane-occupying work; deploy traffic cones and warning signs as specification. Operators must wear high-visibility safety garments.

7. Conclusion: Select Machine According to Actual Site Conditions

-DG400 self-propelled and TG350 trailer-mounted crack-sealing machines share nearly identical core heating, temperature-control and pumping-sealing assemblies. The major difference lies in travelling-propulsion mode. - DG400 self-propelled features independent mobility and suits large-scale continuous sealing projects. TG350 trailer-mounted is compact and light-weight, relying on towing vehicles, and fits scattered-spot minor maintenance. - During procurement and scheduling, comprehensively consider local pavement-defect distribution, available supporting vehicles and on-site space constraints, to maximize equipment performance for preventive crack sealing maintenance.

DG400-16-DSC_6306-1


RELATED PRODUCTS
RELATED NEWS

QUICK LINKS

PRODUCT CATEGORY

Leave a Message
CONTACT US

OTHER LINKS

CONTACT US
 Tel: +86-512-6253-8115
 Phone: +86-173-5377-3286
 WhatsApp: +8617353773286
 Email: amy@fanuode.cn
 Add: No. 63, Chuangli Road, Qidu Town, Wujiang District, Suzhou City, Jiangsu Province
Copyright © 2025 Suzhou Fanuode Engineering Machinery Co., Ltd. All Rights Reserved.