electric crack grooving machine partner
You are here: Home » News » Blogs » The Era of Intelligent Trimming — Operation Logic & Advantages of Fully-Automatic Green-Space Trimming Equipment

The Era of Intelligent Trimming — Operation Logic & Advantages of Fully-Automatic Green-Space Trimming Equipment

Views: 0     Author: Site Editor     Publish Time: 2026-10-25      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

1. Core Operation Logic:Full-hydraulic Drive and Dual-arm Synergistic Operation

Different from many single-arm green-maintenance machinery on market that only supports one-direction trimming, the Fanode FND-HS620 intelligent dual-arm full-hydraulic hedge trimmer, this vehicle-mounted dual-arm green-maintenance platform, adopts independent main-and-auxiliary dual-arm structure. All movements are driven by full-hydraulic system. Working commands are transmitted through LCD-equipped wireless remote controller. Two arms perform separate tasks and realize simultaneous trimming for horizontal, vertical and inclined surfaces, eliminating repeated back-and-forth driving required by conventional single-function green-maintenance machinery.

1. Working principle of main working arm The main arm is built with 3-section folding structure plus 1000 mm telescopic stroke, delivering maximum trimming height of 6500 mm. It supports lifting, lowering, folding, telescoping and full 360-degree slewing. In real-world highway maintenance, the main arm undertakes high-altitude branch pruning and large-area shaping for highway median hedges. When guardrails, traffic signs or utility poles block working paths, booms fold to bypass obstacles without repositioning the carrier vehicle.

Operator Benefits: Large working height covers most high-branch pruning requirements, removing overgrown branches that block traffic signs and driver sightlines. 360-degree slewing and obstacle-avoidance folding reduce vehicle reposition frequency, cut working time for each road section and mitigate traffic disturbance caused by lane-occupying maintenance.

image.png

  

2. Working principle of auxiliary working arm The auxiliary arm features 2-section folding design with maximum trimming height of 2000 mm and trimming width up to 1500 mm. It operates independently from the main arm for simultaneous multi-surface processing. While vehicle travels forward, the main arm finishes horizontal top-cut for median hedges, meanwhile the auxiliary arm executes side oblique trimming. Top-surface and side-profile finishing are completed within one single vehicle pass, no extra return trip is required. The auxiliary arm can also work alone for low-shrub trimming along road shoulders and lower-section slope vegetation.

Operator Benefits: Productivity multiplies for given maintenance mileage. Fewer vehicle round trips save fuel consumption. Shorten road-occupation duration and ease traffic-diversion pressure during maintenance operations.

3. Human-machine interaction via wireless remote control This highway hedge-shaping working unit replaces complex multi-lever mechanical cabin controls. All machine movements are managed by wireless remote controller with built-in LCD screen. Real-time data including boom angle, hydraulic pressure, equipment status and cutter rotational speed are displayed on terminal screen. Operators can control the machine either inside carrier cabin or in safe zones far from traffic lanes, keeping away from high-speed passing vehicles. Command logic is user-friendly; operators do not need years of professional machinery operating experience.

Operator Benefits: Physically separate operators from high-risk traffic zones and greatly lower personal-injury hazards on open roads. Lower skill threshold enables ordinary staff to operate after standardized training, reducing reliance on scarce senior technicians.

image.png

 

4. Modular quick-swap cutting-head execution logic As a dual-arm garden-cutting module, all cutters adopt flexible shock-absorbing connection structure. Multiple working attachments can be quickly assembled and disassembled without modifying host hydraulic pipelines. Compatible tool sets include CS1500 main-arm hedge cutter, CS1000 auxiliary-arm hedge cutter, RDS1500 high-branch pruning implement and MT1250 slope mowing tool. Max cutter rotational speed reaches 3000 r/min for stable cutting of branches from 0 mm to 20 mm diameter. Operators only swap front-end attachments instead of the whole host machine when switching between different maintenance assignments.

Operator Benefits: One host machine handles median hedges, tall arbor branches, slope weeds and roadside shrubs. Capital expenditure is reduced without purchasing multiple dedicated green-maintenance machines. Modular tool swap improves asset utilization and cuts idle-storage time.

2. Core Product Advantages to Solve Practical Road Green-Maintenance Pain-Points

2.1 Multi-scenario adaptability for full-range roadside vegetation assignments

The FND-HS620 multi-purpose roadside vegetation-care gear is purpose-built for highway and provincial-road maintenance. One single unit handles diversified green-maintenance tasks:

· Highway median strips: main-auxiliary arms work together for synchronous horizontal top-cut and side oblique-cut to shape median hedges;

· Road-side arbors: main arm extends up to 6.5 m to trim overgrown branches covering traffic signs and street-lights and eliminate driving hazards;

· Road slopes: install slope-mowing attachment to clear slope weeds and wild bushes, solving long-standing difficulties of manual slope trimming;

· Road shoulders and platforms: main-auxiliary arms cooperate to trim low shrubs and lawn vegetation and unify landscape standards across road networks.

Operator Benefits: The machine can be deployed for various green-maintenance projects all year round and avoids long-term idle storage after peak gardening seasons. Less depot space is occupied and fleet-management overhead decreases.

2.2 Stable full-hydraulic power system with low operational noise

This full-hydraulic vegetation-pruning workstation is powered by Yuchai diesel engine and equipped with self-developed full-hydraulic control system. Three-section folding-telescopic booms deliver smooth movement. No obvious boom shake or offset occurs during low-speed forward travel, ensuring neat and even trimming surfaces. Hydraulic system outputs sufficient torque for dense tough bushes without cutter stalling or power drop-off. Low operational noise mitigates noise disturbance in field long-hour operations. Key hydraulic seals and pipelines are reinforced for harsh outdoor conditions including intense sunshine, rain and large temperature fluctuations.

Operator Benefits: Neat trimmed hedge surfaces upgrade roadside landscape quality. Low failure rate reduces unexpected on-site breakdowns, guarantees project schedules and cuts long-term repair & maintenance expenses.

2.3 Multi-layer safety-oriented design mitigating on-site risks

Roadside green-maintenance counts as high-risk outdoor work. Multiple hardwarelevel safety protections are integrated:

· Wireless remote control keeps operators away from moving-traffic lanes and prevents vehicle-scratch injuries;

· 210-degree boom folding and full 360-degree slewing support flexible obstacle avoidance against guardrails and sign-posts and prevent equipment collision damage;

· Flexible shock-absorbing blade connections release impact force when cutters accidentally hit stones or metal hard objects, protecting cutter heads and hydraulic motors;

· Hydraulic over-pressure protection triggers automatic pressure relief under stalling conditions to safeguard core machine components.

Operator Benefits: Lower accident probability for front-line crews and avoid secondary losses such as compensation, work suspension and regulatory assessment triggered by safety incidents. Extend service life of cutter assemblies and hydraulic components and prolong overall machine lifecycle.

2.4 Significant cost-reduction & productivity improvement to relieve labor shortage and rising labor costs

Traditional long-distance roadside hedge trimming requires large work teams equipped with chainsaws and pole pruners, plus extra traffic-warning staff. When deploying this vehicle-mounted dual-arm green-maintenance platform, only a small number of operators are required for full-route trimming. High-speed mechanical cutters replace heavy manual labor and drastically shorten working time per road kilometer.

Operator Benefits: Mitigate industry-wide challenges of labor shortage and continuously rising labor costs. Downsizing work-team scale directly lowers comprehensive vegetation-care cost per kilometer.

3.Key Technical Specifications

Item

Unit

FND-HS620 Parameter

Drive Power

-

Yuchai Diesel Engine

Control Mode

-

Wireless Remote Control with LCD Display

Overall Dimension(L×W×H)

mm

3680×2100×3200

Total Machine Weight

kg

2580

Slewing Angle

°

360

Max Trimming Height(Main Arm)

mm

6500

Trimming Width(Main Arm)

mm

1500

Telescopic Stroke(Main Arm)

mm

1000

Max Trimming Height(Aux. Arm)

mm

2000

Trimming Width(Aux. Arm)

mm

1500

Workable Branch Diameter

mm

0-20

4. Practical Industry Implementation Value

Road-side green-maintenance industry is constantly troubled by several stubborn pain-points: high on-site operation risks, year-by-year labor-cost inflation, requirement for multiple dedicated machines for different assignments, inconsistent trimming quality and difficulty of realizing unified landscape standards for full-road networks.

image.png

The Fanode FND-HS620 intelligent dual-arm full-hydraulic hedge trimmer, namely this multi-purpose roadside vegetation-care gear, systematically addresses above-mentioned industry challenges via dual-arm synergistic workflow, mature full-hydraulic power architecture, intelligent wireless remote-control system and modular quick-swap cutting assemblies. It is more than simple garden-cutting hardware, but a complete intelligent roadside green-maintenance solution.

For highway operators, road-maintenance centers, municipal authorities and third-party maintenance contractors, its value goes beyond higher trimming speed. It protects front-line maintenance staff, shortens lane-occupying construction periods and eases traffic-diversion pressure. It controls labor and redundant-procurement expenditure and achieves standardized trimming results across whole road networks. Suzhou Fanode Engineering Machinery supports custom modification according to local vegetation and road conditions, delivering vegetation-maintenance equipment tailored for global road-maintenance end-users.

RELATED PRODUCTS
RELATED NEWS

QUICK LINKS

PRODUCT CATEGORY

Leave a Message
CONTACT US

OTHER LINKS

CONTACT US
 Tel: +86-512-6253-8115
 Phone: +86-173-5377-3286
 WhatsApp: +8617353773286
 Email: amy@fanuode.cn
 Add: No. 63, Chuangli Road, Qidu Town, Wujiang District, Suzhou City, Jiangsu Province
Copyright © 2025 Suzhou Fanuode Engineering Machinery Co., Ltd. All Rights Reserved.