| Availability: | |
|---|---|
| Quantity: | |
XHS-40000
FND
1. Core Highlight:4 m³ Super-large-capacity Polyethylene Hopper, Max Payload 4600 kg for Heavy-duty Arterial-road Snow Removal This model represents large-volume grade among pickup-truck-mounted spreaders. 4 cubic-meter polyethylene hopper holds up to 4600 kg de-icing materials per fill. One single fill supports long-distance continuous spreading on highways and provincial arterial roads, greatly reducing depot-return refilling frequency and improving emergency response efficiency during heavy snow storms. The integral high-molecular polyethylene hopper resists chemical corrosion caused by salt and de-icing agent, fundamentally eliminating rust-perforation failure common on metal hoppers.
2. Polyester-rubber Spinner Assembly, 100% Rust-free, Quick-disassembly for Easy Maintenance The spreading spinner disc is constructed of polyester-rubber material. Unlike steel-metal spinner, it will never get rusty when contacting salty de-icing materials. Complete spinner assembly supports fast on-site disassembly and replacement, cutting down maintenance downtime and spare-part cost. Matched with stainless-steel V-groove and adjustable polyester baffle, the full material-contact assembly delivers outstanding anti-corrosion performance and extends overall machine service life.
3. Cabin-mount LCD Control with 485 Communication, Rich Standard Safety Auxiliary Lights LCD controller with 485 communication protocol allows operators to finish speed adjustment and start-stop control entirely inside truck cabin without stepping out into bad weather. Control unit integrates dual-speed regulation, anti-explosion and overload-protection functions. Vibration motor, rear-view LED lamp and LED warning beacon come as standard configuration. Vibration motor solves material-bridging risk under full-load condition of the 4 m³ big hopper. LED lighting improves construction safety for night-time and low-visibility blizzard conditions. Built-in DC24V 2000W generator plus dual 80A batteries guarantee stable power supply.
4. High-torque Screw-auger Feeding, Flexible 0.6-12 m Spreading Width Heavy-duty auger with 16 cm outer diameter and 23 cm pitch, driven by 800W auger motor delivers stable powerful feeding, max feeding rate reaches 0.06 m³ per minute. 200W spreading motor supports adjustable spreading width from 0.6-12 meters. It can perform wide-coverage spreading for highways as well as narrow low-dosage spreading for city streets. Infinitely variable speed enables real-time adjustment for feed-rate and spreading range to adapt diversified road conditions.
5. Optimized Weight-to-payload Ratio, Fits Mainstream Light-truck Cargo Beds, Simple Installation Net machine weight is only 640 kg. It fits 1-4 ton light-duty trucks with minimum cargo-bed length of 168 cm. Secured by 4-type standard receiver hitches on truck bed, no heavy vehicle modification is required. Feed and spread motors support DC12V / DC24V option to match electrical system of vehicles from different regions.
Model | XHS-40000 Polyethylene Spreader |
Overall Dimensions | 3600mm (L) × 1345mm (H) × 1380mm (W) |
Spreader Net Weight | 640Kg |
Hopper Capacity | 4m³ / 4600kg |
Spreading Materials | Salt, Sand, Granular Stone, De-icing Agent |
Hopper Material | Polyethylene |
Feeding Mechanism | Internal Screw Auger Conveyor, Adjustable Speed (Screw Outer Diameter: 16cm; Screw Pitch: 23cm) |
Maximum Feeding Rate | 0.06 m³ Per Minute |
Gearbox Reduction Ratio | 1:80 |
Auger Motor | High-torque DC12V (24V Optional), 800W |
Spreading Motor | 200W (12V/24V) |
Spinner Disk | 36.8cm Polyester |
Spreading Width | 0.6–12m |
V-Groove | Stainless Steel |
Adjustable Baffle | Polyester Material |
Receiver Hitch | Class 4 |
Spinner Assembly | Easy to Disassemble |
Control System | LCD Liquid Crystal Controller with 485 Communication Protocol, Dual Variable Speed Control, with Explosion-proof Function and Overload Protection |
Minimum Cargo Box Length | 168cm |
Vehicle Compatibility | 1-4 Ton Light Truck |
Generator | DC24V 2000W |
Battery | 80A*2 |
Vibration Motor | Standard Configuration |
LED Rear Lighting | Standard Configuration |
LED Warning Light | Standard Configuration |
Control Method | Cab Control |



We are professional manufacturer for snow-removal and road-maintenance machinery with self-owned in-house production workshop. OEM modification service is available. All machines are CE certified. We support single-unit retail, bulk purchase and FCL full-container export for global customers.
· ✅OEM Customization: Working voltage, light configuration, mounting hitch interface, control program and hopper accessories can be modified according to local-market vehicle & project requirements.
· ✅CE Certification: Full set of CE documents are provided for customs clearance and international project tender submission.
· ✅Full-machine Warranty: Complete-unit warranty is offered, special warranty covers core assemblies including generator, motors and augers.
· ✅Global Spare-parts Supply: Long-term cross-border supply of wear-parts and replacement components.
· ✅Overseas On-site Technical Service: Overseas engineers are available for on-site commissioning and installation guidance.
· ✅FCL Full-container Wholesale Discount: Special volume discount for bulk full-container project orders.
· ✅Tender Document Support: Supply technical datasheets, brochures and factory qualification documents for bidding projects.
· ✅Clear Production Lead-time: Confirm production schedule for wholesale & project orders to guarantee ontime delivery for winter snow-removal projects.
Challenges: Highways and national arterial roads cover long mileage and demand non-stop high-intensity spreading during heavy snowfall. Small-capacity spreaders need frequent return trips for refilling and miss the optimal snow-treatment time window. Metal hoppers and steel spinner discs suffer severe rust corrosion when exposed to de-icing salt. Night-time or blizzard-time construction lacks lighting and warning signals. Operators prefer cabin-based operation to avoid exposure to harsh snowy weather.
Our Proposed Solution: Adopt XHS-40000 large-volume polyethylene de-icing spreader. 4 m³ oversized hopper with max 4600 kg payload greatly cuts refilling frequency and enables long-hour continuous operation along arterial highways. Polyethylene hopper plus polyester-rubber spinner eliminate rust-corrosion risk for all material-contact components. Cabin-mount LCD controller with 485 communication lets drivers adjust all spreading parameters without leaving vehicle. Standard-fit rear-view LED lamp and LED warning light enhance safety during night and blizzard operations. Standard vibration motor guarantees stable discharging even under full hopper load for emergency snow rescue missions.

Challenges: Airport aprons and huge industrial-park sites require high-payload spreader equipment. Wide-range heavy spreading is needed for main zones while narrow-width low-volume spreading is required for ramps and taxiways. Equipment must withstand continuous salt-induced corrosion. Multi-unit bulk purchase is common and certain projects require special electrical or mounting modifications.
Our Proposed Solution: Deploy XHS-40000 4 m³ truck-bed spreader. Large payload satisfies long-time continuous operation over open-field large-size sites. Spreading width adjustable 0.6-12 meters: wide setting for main roads and narrow setting for ramps & taxiways. Polyethylene hopper and polyester-rubber spinner completely prevent rust failure. Cabin centralized control together with standard vibration & lighting package is ready for field work. OEM modification is supported for voltage, hitch and light configuration to satisfy special requirements from airport and industrial-park projects.
1. Machine Trial Test: Domestic customers can witness machine trial-run at our factory. Overseas buyers can receive full trial-run videos and real-site operation footage.
2. Export Container Packing: Export orders are secured in fumigated solid wooden export crates, suitable for FCL full-container or LCL less-than-container sea shipment to avoid transit damage.
3. After-sales Spare-parts Support: Long-term supply for full range of wearing parts including generator, vibration motor, auger, polyester-rubber spinner disc and LCD control module. Spare-parts-only cross-border orders are acceptable.
4. Technical Assistance: Chinese & English operation manuals are supplied. Free remote video commissioning support is available. Overseas engineer on-site service can be arranged upon request.
5. Negotiable Price for Large-volume Orders: Prices are negotiable for large purchase quantities. Please send your procurement list for further business discussion.
https://www.szfanuode.com/XHS-3000-Snow-Salt-Spreader-pd558914548.html
https://www.szfanuode.com/XHS-10000-Salt-Spreader-for-Pick-Up-Truck-pd538914548.html
https://www.szfanuode.com/Truck-Mounted-Attenuator-Vehicle-pd526914548.html
Q1: What is hopper capacity of XHS-40000? Will the spinner disc get rusty?
A: Hopper volume is 4 m³ with max loading weight of 4600 kg. The spinner disc is made of polyester-rubber material. It never rusts when contacting salt and de-icing agent and supports quick disassembly & replacement.
Q2: Can I operate this spreader from inside truck cabin?
A: Yes, cabin-mount operation is supported. It is fitted with LCD controller with 485 communication protocol. Operators can complete start-stop and speed adjustment without getting off the vehicle.
Q3: Are vibration motor and LED lights standard or optional accessories?
A: Vibration motor, rear-view LED lamp and LED warning beacon are all standard parts. They are specially configured for full-load working condition of 4 m³ large hopper and improve working safety during night-time and blizzard weather.
Q4: What is adjustable spreading-width range? Do I need external generator?
A: Spreading width can be adjusted infinitely from 0.6-12 meters. Built-in DC24V 2000W generator plus two 80A batteries provide stable power supply. No external generator is required.
Q5: What vehicles are compatible? Is there any cargo-bed size requirement?
A: It fits 3/4 ton and 1-4 ton light-duty trucks. Minimum required cargo-bed length is 168 cm. It is fixed on truck bed via hitches and major vehicle modification is not needed.
Q1: Are you road maintenance machine manufacturer or trading company?
A: We are original manufacturer with in-house road-machinery production workshop, all units are self-produced.
Q2: Can you offer CE certificate for customs clearance & project tender?
A: Yes, full CE certification documents can be provided for customs clearance and international tender bidding.
Q3: What is MOQ for bulk order of this de-icing spreader?
A: MOQ: 1 unit. Special wholesale discount is available for FCL full-container bulk orders.
Q4: Do you support OEM custom machine configuration?
A: Yes, OEM modification is available for voltage setting, light configuration, hitch interface and control module according to client requirements.
Q5: Can your engineer provide overseas on-site installation guidance? What is the cost?
A: Overseas on-site technical support can be arranged. Service cost will be calculated individually based on destination country and service duration. Free remote video commissioning is also provided.
Q6: Do you supply long-term spare-parts for road repair equipment? A: We offer long-term supply of complete wearing-part sets, spare-parts-only export orders are acceptable.
Q7: What discount for FCL full-container project order?
A: Discount depends on order quantity, machine configuration and destination port. Please send inquiry for formal quotation.
Q8: How long is production lead-time for wholesale project orders? A: Production schedule is subject to order quantity. Normal lead-time:7-15 working days. Please confirm lead-time in advance during peak winter season.
Q9: If I have special requirements, can we discuss and adjust the machine accordingly?
A: Yes. Please share your working-site conditions and special requirements, we can communicate and adjust machine configuration as per your demands.


